CYJ series dumbbell sample prototype is mainly used in iron and steel enterprises, universities and other production test metal sheet materials, dumbbell type standard sample processing; punching a wide range of mold selection of a single device can be applied to a variety of shapes of standard samples stamping
1, the equipment using the top of the cylinder placement, four column frame structure, powered by the hydraulic source, through the hydraulic valve to control the piston up, under pressure action, the piston pressure to push the punch on the stamping parts of the force and standard mold with the formation of stamping parts Stamping process.2, after the stamping of the sample automatically fall in the sample collection box3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)4, punching speed 20-100mm / min5, the host size 1200X700X18256, the motor power 2.2kw7, power AC380V ± 10% three-phase four-wire8, weighs about 2500kg
- Structural principle and main parameters
Instructions1, open the device power.2, open the pump.3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)4, loading stamping materials (the cut into a long strip of material into the mold)5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)Repeat steps 3-5 for the next production.
|2,Punching range:||1~8mm(Need to replace the mold)|